Tru64 Tips: differenze tra le versioni
Jump to navigation
Jump to search
Nessun oggetto della modifica |
|||
(2 versioni intermedie di uno stesso utente non sono mostrate) | |||
Riga 1: | Riga 1: | ||
=Reset root password= |
|||
⚫ | |||
<pre> |
|||
Re: root password recovery technique for Tru64 on Alpha 4100 |
|||
Joe, |
|||
1. Bring the system to the SRM prompt -- P00>>> |
|||
To do that if the system is running press the HALT Button or try Control-P from the console. If the system is powered off power it on. Depending on the auto_action SRM variable it might try to boot, but then you can HALT it or power cycle and use Ctrl+C to not allow it to boot (this might be tricky -- you need to know the exact moment to press Ctrl+C -- right before booting). |
|||
2. Once at the >>> prompt, boot to single user mode: |
|||
>>> boot -fl s |
|||
3. run this if you are using LSM: |
|||
# lsmbstartup |
|||
4. verify & mount all local filesystems: |
|||
# /sbin/bcheckrc |
|||
or you could just use: |
|||
# mount -u / (on V5 there is a mountroot script) |
|||
5. here you can either use: |
|||
# passwd root (to set a new root password) |
|||
or |
|||
# vipw (or vi /etc/passwd) |
|||
and delete the root password |
|||
6. then init 3 or ^D to bring the system all the way up |
|||
HTH, |
|||
Ross |
|||
</pre> |
|||
⚫ | |||
Alcuni parametri forniti dalla Oracle sono insufficienti, e la documentazione Oracle è incompleta. Questi sono i parametri giusti. |
Alcuni parametri forniti dalla Oracle sono insufficienti, e la documentazione Oracle è incompleta. Questi sono i parametri giusti. |
||
Riga 61: | Riga 97: | ||
[[Categoria:Unix]] |
[[Categoria:Unix]] |
||
[[Categoria:Legacy Unix]] |
|||
[[Categoria:Tru64]] |
Versione attuale delle 17:54, 29 mar 2018
Reset root password
Re: root password recovery technique for Tru64 on Alpha 4100 Joe, 1. Bring the system to the SRM prompt -- P00>>> To do that if the system is running press the HALT Button or try Control-P from the console. If the system is powered off power it on. Depending on the auto_action SRM variable it might try to boot, but then you can HALT it or power cycle and use Ctrl+C to not allow it to boot (this might be tricky -- you need to know the exact moment to press Ctrl+C -- right before booting). 2. Once at the >>> prompt, boot to single user mode: >>> boot -fl s 3. run this if you are using LSM: # lsmbstartup 4. verify & mount all local filesystems: # /sbin/bcheckrc or you could just use: # mount -u / (on V5 there is a mountroot script) 5. here you can either use: # passwd root (to set a new root password) or # vipw (or vi /etc/passwd) and delete the root password 6. then init 3 or ^D to bring the system all the way up HTH, Ross
Configurare i parametri del kernel per Oracle 10gR2
Alcuni parametri forniti dalla Oracle sono insufficienti, e la documentazione Oracle è incompleta. Questi sono i parametri giusti.
tune_kernel.sh
#!/bin/sh echo ' ipc: shm_max = 4278190080 shm_min = 1 shm_mni = 256 shm_seg = 256 proc: exec_disable_arg_limit = 1 per_proc_stack_size = 8388608 max_per_proc_stack_size = 33554432 per_proc_data_size = 629145600 max_per_proc_data_size = 4294967296 max_per_proc_address_space = 4294967296 per_proc_address_space = 4294967296 max_proc_per_user = 2048 max_threads_per_user = 2048 maxusers = 4096 rdg: msg_size = 32768 max_objs = 5120 max_async_req = 256 max_sessions = 500 rdg_max_auto_msg_wires = 0 rdg_auto_msg_wires = 0 rt: aio_task_max_num = 8193 vfs: fifo_do_adaptive = 0 vm: new_wire_method = 0 inet: tcbhashsize = 32768 tcp_keepalive_default = 1 tcp_sendspace = 65536 tcp_recvspace = 65536 socket: somaxconn = 65535 sominconn = 65535 sbcompress_threshold = 600 ' > /tmp/$$.sysconfigtab sysconfigdb -m -f /tmp/$$.sysconfigtab rm -rf /tmp/$$.sysconfigtab sysconfigdb -s